Transfer

We are nationally and internationally active in order to contribute to the body of knowledge.

Workshops

  • Workshop “Modular Multilevel Converters: Modelling, Control, and Reliability – Part II” (Friday, 16.12.2022 between 08:30-14:00, Pontificia Universidad Católica de Chile, Santiago, Chile)
  • Workshop “Modular Multilevel Converters: Modelling, Control, and Reliability – Part I” (Wednesday, 29.06.2022 between 10:30-17:00, Hochschule München, Munich, Germany)
  • IEEE Webinar “Online Loss Minimization for Electrical Machines” (Wednesday, 21.04.2021 between 14-15:30, IEEE Online Seminar).
  • Workshop “Effiziente elektrische Antriebe” (Friday, 17.05.2019 between 10:00-17:00, Hochschule München, Munich, Germany)

Scientific and seminar talks

108.C.M. Hackl, “Faults in Modular Multilevel Cascade Converters”, Pontificia Universidad Católica de Chile, Santiago de Chile, Chile, 16.12.2022 (with Prof. Felix Rojas; eingeladener Vortrag).
107.C.M. Hackl, “Nonlinear modeling, identification and optimal feedforward torque control of induction machi- nes using steady-state machine maps”, University of Padua, Padua, Italy, 21.09.2022 (eingeladener Vortrag).
106.C.M. Hackl, “Artificial Neural Network based Optimal Feedforward Torque Control of Synchronous Machi- nes”, University of Padua, Vicenza, Italy, 20.09.2022 (eingeladener Vortrag).
105.C.M. Hackl, “Funnel control with internal model and anti-windup for input-saturated mechatronic systems”, University of Bayreuth, Bayreuth, Germany, 13.09.2022 (eingeladener Vortrag; MTNS Invited Session on “Adaptive Control under Input or Output Constraints”).
104.C.M. Hackl, “ANN-based OFTC of Synchronous Machines”, Technical University of Munich (TUM), Gar- ching, Germany, 01.08.2022 (eingeladener Vortrag; Prof. Ralph Kennel’s Farewell Symposium).
103.C.M. Hackl, “ANN-based OFTC of Synchronous Machines”, University of Bremen, Germany, 07.06.2022 (eingeladener Vortrag).
102.C.M. Hackl, “Nonlinear modeling, identification and optimal feedforward torque control of induction machines using steady-state machine maps”, Stellenbosch University, South Africa, 01.04.2022 (eingeladener Vortrag).
101.C.M. Hackl, “Artificial Neural Network based Optimal Feedforward Torque Control of Synchronous Machines”, Stellenbosch University, South Africa, 30.03.2022 (eingeladener Vortrag).
100.C.M. Hackl, “Optimal operation of electrical drives”, Key note at IEEE Conference “Advances in Electrical Machines, Drives & Vehicles” (online), 08.09.2021 (eingeladener Vortrag).
99.C.M. Hackl, “A generic framework to minimize copper and iron losses in electrical machines in real time”, Technical University of Darmstadt, 13.07.2021 (eingeladener Vortrag).
98.C.M. Hackl, “A holistic view on digital twins in the future energy system”, Wind Energy Science Conference (WESC; online), 25.05.2021 (Special Session).
97.C.M. Hackl, “Online Loss Minimization for Electrical Machines”, IEEE-IES Webinar (online), 21.04.2021 (eingeladener Vortrag).
96.C.M. Hackl, “Multi-objective optimization: An introduction”, ISES Scientific Seminar (online), 29.03.2021.
95.C.M. Hackl, “Power Electronics in Bavaria …and how adding intelligence makes it the enabling techno- logy for the Energiewende”, Netzwerktreffen des BayWISS Verbundkollegs Energie (online), 27.10.2020 (eingeladener Vortrag).
94.C.M. Hackl, “Airborne Wind Energy – Session 3F: Electrical system”, IEA WIND, Topical Expert Meeting TEM 102 (online), 24.10.2020 (eingeladener Vortrag).
93.C.M. Hackl, “Optimal operation of synchronous machines – A complete framework to minimize copper & iron losses”, AUDI AG, Ingolstadt, 14.10.2020 (eingeladener Vortrag). “Netzzustandserkennung mithilfe interner Modelle”, Elgersburg Workshop 2020, Germany, 19.02.2020 (eingeladener Vortrag).
92.C.M. Hackl, “Netzzustandserkennung mithilfe interner Modelle”, Elgersburg Workshop 2020, Germany, 19.02.2020 (eingeladener Vortrag).
91.C.M. Hackl, “Grid state estimation of arbitrarily distorted grids”, German-Turkish Workshop, Technical University of Munich, 10.02.2020.
90.C.M. Hackl, “Internal model based grid state estimation”, Workshop of the Institute of Sustainable Energy Systems (ISES), Munich University of Applied Sciences, 09.12.2019.
89.C.M. Hackl, “Reluctance Synchronous Motors for ESP Systems”, Geothermal Energy Systems Workshop, Technical University of Munich, 11.12.2019.
88.C.M. Hackl, “Generic loss minimization in synchronous machines by analytically computed optimal reference currents”, ALM Symposium, Switzerland, 30.07.2019 (eingeladener Vortrag).
87.C.M. Hackl, “Internal model based grid state estimation”,Technical University Ilmenau, Germany, 19.06.2019 (eingeladener Vortrag).
86.C.M. Hackl, “Analytische Berechnung der optimalen Sollströme für beliebige Synchronmaschinen zur Mini- mierung der Kupfer- & Eisenverluste in allen Betriebsbereichen”, LMRES Workshop on “Efficient Electrical Drives”, Munich University of Applied Sciences, Germany, 17.05.2019.
85.C.M. Hackl, “Generic loss minimization of synchronous machines by analytically computed optimal reference currents”, University of Paderborn, Germany, 15.03.2019 (eingeladener Vortrag).
84.C.M. Hackl, “Grid state estimation: An internal model based approach”, Technical University of Munich, Germany, 15.02.2019 (Habilitationsabschlussvortrag).
83.C.M. Hackl, “Modeling and control of wind turbine systems with open switch converter faults”, German-Turkish Workshop, Technical University of Munich, Germany, 23.07.2018.
82.C.M. Hackl, “Non-identifier based adaptive control with internal models for mechatronic energy systems”, 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Munich, Germany, 20.03.2018 (eingeladener Vortrag).
81.C.M. Hackl, “Parallelized Second-Order Generalized Integrators (SOGIs) for balanced and unbalanced grid conditions”, German-Turkish Project Meeting & Workshop, Technical University of Munich, Germany, 20.09.2017.
80.C.M. Hackl, “Is MPC really suitable for power electronic systems?”, MPC Workshop, Technical University of Munich, Germany, 19.09.2017 (eingeladener Vortrag).
79.C.M. Hackl, “Analytical computation of the optimal reference currents for MTPC/MTPA, MTPV and MT- PF operation of anisotropic synchronous machines considering stator resistance and mutual inductance”, EPE 2017 ECCE Europe Conference, Warsaw, Poland, 13.09.2017.
78.C.M. Hackl, “Model predictive control with analytical solution and integral error feedback for current control of doubly-fed induction generators (DFIGs) with LC filter”, 4th Symposium on Predictive Con- trol of Electrical Drives and Power Electronics (PRECEDE), Pilsen, Czech Republic, 05.09.2017 (Session Chair).
77.C.M. Hackl, “Optimal feedforward torque control of anisotropic synchronous machines with analytical solution considering stator resistance and cross-coupling inductance”, Technical University of Kaiserslautern, Germany, 01.08.2017 (eingeladener Vortrag).
76.C.M. Hackl, “The (future) electrical power system dynamics: A systems theoretical point of view”, TUM-CREATE, Singapore, 07.06.2017 (eingeladener Vortrag).
75.C.M. Hackl, “Modeling and control of renewable energy systems”, TUM-CREATE, Singapore, May-July 2017 (eingeladene Vorlesung).
74.C.M. Hackl, “The dynamics of the (future) electrical power system: A systems theoretical point of view”, Technical University of Munich, 20.04.2017 (eingeladener Vortrag).
73.C.M. Hackl, “Observer state feedback current control of grid-connected voltage source inverters with LCL filter”, Munich University of Applied Sciences, 06.04.2017 (eingeladener Vortrag).
72.C.M. Hackl, “Optimal feedforward torque control of anisotropic synchronous machines with analytical solution considering stator resistance and mutual inductance”, Munich University of Applied Sciences, 31.03.2017 (eingeladener Vortrag).
71.C.M. Hackl, “Optimale Betriebsführung, Momentenvorsteuerung und analytische Stromreferenzberechnung zur Verlustminimierung in anisotropen Synchronmaschinen”, Volkswagen AG, Salzgitter, Ger- many 06.–07.03.2017 (eingeladener Vortrag).
70.C.M. Hackl, “A unified theory for optimal feedforward torque control of anisotropic synchronous machines”, Technical University of Munich, Germany, 18.01.2017 (Habilitationszwischenvortrag).
69.C.M. Hackl, “Regelung von regenerativen Energiesystemen”, Lehrstuhl für Elektrische Antriebssysteme, Technical University of Munich, 21.11.2016.
68.C.M. Hackl, “Control of renewable energy systems”,Internationales Geothermiezentrum Bochum, 24.10.2016.
67.C.M. Hackl, “Control of renewable energy systems”, WindForS Board Meeting, Stuttgart, 13.10.2016.
66.C.M. Hackl, “Regelung von regenerativen Energiesystemen und das Teilprojekt ’Tauchkreiselpumpe’ ”, Vor- abtreffen mit Geothermieanlagen-Betreibern im Rahmen des Geothermie-Allianz Bayern Pro- jektes, Sauerlach, 22.09.2016
65.C.M. Hackl, “Control of renewable energy systems”, Meeting with Stadtwerke München (SWM), Technical University of Munich, 17.05.2016.
64.C.M. Hackl, “Nonlinear methods for renewable energy systems”, ENER16 — Simposio Energías Renovables, Curicó, Chile, 13.05.2016 (eingeladener Vortrag).
63.C.M. Hackl, “Control of renewable energy systems”, DIE University of Chile, Santiago de Chile, Chile, 10.05.2016 (eingeladener Vortrag).
62.C.M. Hackl, “Nonlinear control of renewable energy systems”,Duoc UC,Santiago de Chile, Chile, 06.05.2016 (eingeladener Vortrag).
61.C.M. Hackl, “Projektbezogen Studieren – Aktives Studieren im Team: Projektstudium Antriebstechnik”, Forum der Lehre, Coburg, 29.04.2016 (eingeladener Vortrag).
60.C.M. Hackl, “Nonlinear methods for renewable energy systems”, IEEE Joint IAS/PELS/IES German Chapter Meeting, Technical University of Munich, 21.04.2016 (eingeladener Vortrag).
59.C.M. Hackl, “Control Renewable Energy Systems”, Meeting with RICE Institute from Pilsen, Technical University of Munich, 11.04.2016.
58.C.M. Hackl, “Control of renewable energy systems”, Meeting with Bachmann electronic GmbH, Technical University of Munich, 17.02.2016.
57.C.M. Hackl, “Current PI-funnel control with anti-windup for reluctance synchronous machines”, Colloquium on the occasion of the 60th birthday of Achim Ilchmann, Elgersburg, 12.02.2016 (eingeladener Vortrag).
56.C.M. Hackl, “Regelung von regenerativen Energiesystemen – am Beispiel von Windkraftanlagen”, MSE Ringvorlesung “Welt der Ingenieurwissenschaften”, Technical University of Munich, Garching, 18.01.2016 (eingeladener Vortrag).
55.C.M. Hackl, “Current PI-funnel control with anti-windup for synchronous machines”, 54th IEEE Conference on Decision and Control, Osaka, Japan, 16.12.2015. (Session Chair “Power Systems I”, DAAD Förderung).
54.C.M. Hackl, “Speed funnel control with disturbance observer for wind turbine systems with elastic shaft”, 54th IEEE Conference on Decision and Control, Osaka, Japan, 16.12.2015. (Session Chair “Power Systems I”, DAAD Förderung).
53.C.M. Hackl, “Control of renewable energy systems”, Institute for Electrical Drive Systems and Power Elec- tronics, Project meeting, Technical University of Munich, 07.12.2015.
52.C.M. Hackl, “Control of renewable energy systems”, BMW, München, 24.11.2015.
51.C.M. Hackl, “Funnel Control in der Mechatronik”, Ringvorlesung Magnetics 4 Freaks”, Hochschule Heilbronn, Künzelsau, 19.11.2015 (eingeladener Vortrag).
50.C.M. Hackl, “Moderne Verfahren für regenerative Energiesysteme”, SinnPower GmbH, Gauting, 26.10.2015.
49.C.M. Hackl, “Control of renewable energy systems”, 2. Status-Quo Treffen Energy Valley Bavaria, Garching, 20.10.2015.
48.C.M. Hackl, “Moderne Verfahren zur Regelung und Parameterschätzung von Windkraftanlagen”, Bachmann electronic GmbH, Feldkirch, Österreich, 16.10.2015 (eingeladener Vortrag).
47.C.M. Hackl, “Nonlinear control and parameter estimation of renewable energy systems”, DIE University of Chile, Santiago de Chile, Chile, 09.10.2015.
46.C.M. Hackl, “MPC with analytical solution and integral error feedback for LTI MIMO systems and its application to current control of grid-connected power converters with LCL-filter”, Valparaiso, Chile, 05.10.2015 (Session Chair).
45.C.M. Hackl, “Introduction and research foci of the TUM AWESCO partners”, Enerkite GmbH, Berlin, 03.09.2015.
44.C.M. Hackl, “Die regelungstechnische Einbindung ins Stromnetz”, Bayern Innovativ Cluster-Treffen ”Forchung für die Windenergie an der TUM”, Technical University of Munich, 15.07.2015. (eingeladener Vortrag).
43.C.M. Hackl, “Small-scale wind turbine systems with efficient and inexpensive generator topology for micro- grids”, 5th MSE Kolloquium ”Innovations for Energy Systems, Mobility, Buildings and Mate- rials”, Technical University of Munich, 09.07.2015 (Presentation-Award).
42.C.M. Hackl, “Regelung von regenerativen Energiesystemen: Wie und warum?”, TUM Garching – Lange Nacht der Wissenschaft, Technical University of Munich, 27.06.2015 (eingeladener Vortrag).
41.C.M. Hackl, “Regelung von Reluktanz-Synchronmaschinen für Elektrofahrzeuge”, Lehrstuhl für Fahrzeug- technik (FTM), Technical University of Munich, 24.06.2015.
40.C.M. Hackl, “Modellierung und Regelung von Windkraftanlagen (WKA) mit doppelt-gespeistem Asynchron- generator (DFIG)”, Nordex GmbH, Hamburg, 22.06.2015 (eingeladener Vortrag).
39.C.M. Hackl, “DC-link control for airborne wind energy systems during pumping mode”, Airborne Wind Energy Conference 2015, TU Delft, Netherlands, 15.06.2015.
38.C.M. Hackl, “Moderne Regelungsverfahren in der Energiewandlung”, Technische Universität Dortmund, 13.05.2015 (eingeladener Vortrag).
37.C.M. Hackl, “Die Asynchronmaschine: (Quasi-)Stationäre und dynamische Betrachtung”, Technische Universität Dortmund, 13.05.2015 (eingeladene Vorlesung).
36.C.M. Hackl, “Nonlinear control of reluctance synchronous machines”, Stellenbosch University, Stellenbosch, South Africa, 24.04.2015 (eingeladener Vortrag).
35.C.M. Hackl, “Modellierung und Regelung von Windkraftanlagen: Eine Einführung”, Technische Universität Ilmenau, Ilmenau, 02.04.2015 (eingeladener Vortrag).
34.C.M. Hackl, “Nicht-ideale Momentenregelung in Windkraftanlagen”, Bayern Innovativ, Nürnberg, 24.02.2015.
33.C.M. Hackl, “Renewable Energy Systems”, 1st Winter School of the Munich School of Engineering (TUM) on “Holistic Modeling and Control of Energy Systems”, Ohlstadt, 02.–06.02.2015 (Initiator, Organisator & Dozent).
32.C.M. Hackl, “Modeling and control of electrical components in wind turbine systems”, Wind Energy Institute, Technical University of Munich, 14.01.2015 (eingeladene Vorlesung).
31.C.M. Hackl, “Funnel control for wind turbine systems”, IEEE Multi-Conference on Systems and Control, Antibes, France, 10.10.2014.
30.C.M. Hackl, “Windenergie”, Edgar-Lüscher Lectures 2014, Dillingen/Donau, 30.09.2014 (eingeladener Vortrag).
29.C.M. Hackl, “Path-following funnel control for rigid-link revolute-joint robotic systems”, 21st International Symposium on Mathematical Theory of Networks and Systems, Groningen, Netherlands, 09.07.2014 (eingeladener Vortrag).
28.C.M. Hackl, “DC-link control: Understanding the nontrivial task”, 6th Meeting of the Renewable Energy Systems group of the Institute of Electrical Drive Systems and Power Electronics, Technical University of Munich, Munich, 18.06.2014.
27.C.M. Hackl, “Non-identifier based adaptive control in mechatronics: An overview”, IEEE Guest Lecture IAS/PELS South Africa Section, University of Cape Town, South Africa, 25.04.2014 (eingeladener Vortrag).
26.C.M. Hackl, “Modeling and control of wind turbine systems: An introduction”, Three days block seminar, Stellenbosch University, South Africa, 23.+24.+29.04.2014 (eingeladener Vortrag).
25.C.M. Hackl, “Regelung der Zwischenkreisspannung: Ein Vergleich”, Kolloquium zur nichtlinearen Regelung leistungselektronischer Systeme und elektrischer Antriebe, Universität des Saarlandes, Saarland, 06.02.2014 (eingeladener Vortrag).
24.C.M. Hackl, “PI-funnel control with anti-windup and its application to speed control of electrical drives”, 52nd IEEE Conference on Decision and Control, Florence, Italy, 13.12.2013 (Session Chair “Adaptive Control II”, DAAD Förderung).
23.C.M. Hackl, “Funnel control with disturbance observer for two-mass systems”, 52nd IEEE Conference on Decision and Control, Florence, Italy, 13.12.2013 (Session Chair “Adaptive Control II”, DAAD Förderung).
22.C.M. Hackl, “Elektrische Messung einer Drehbewegung anhand eines Beispiels”, Hochschule Augsburg, Uni- versity of Applied Sciences, Augsburg, 06.12.2013 (eingeladene Vorlesung).
21.C.M. Hackl, “Funnel control for motion control of mechatronic systems”, Hochschule Augsburg, University of Applied Sciences, Augsburg, 06.12.2013 (eingeladener Vortrag).
20.C.M. Hackl, “Is multiple-objective model-predictive control ’optimal’?”, 2nd Symposium on Predictive Control of Electrical Drives and Power Electronics, Munich, 17.10.2013.
19.C.M. Hackl, “PI-funnel Control mit Anti-windup”, Workshop GAMM-Fachausschuss “Dynamik und Regelungstheorie”, Magdeburg, 27.09.2013.
18.C.M. Hackl, “Dezentrale Bahnspannungsregelverfahren am Beispiel einer Papierstreichanlage”, Technical University of Munich, 11.02.2013.
17.C.M. Hackl, “Funnel control for speed and position control: An overview”, Stellenbosch University, South Africa, 13.12.2012 (eingeladener Vortrag, BayFOR Förderung).
16.C.M. Hackl, “Funnel control in mechatronics: An introduction”, B&R Automation, Salzburg, Austria, 31.10.2012.
15.C.M. Hackl, “Position funnel control with linear internal model”, 2012 IEEE Multi-conference on Systems and Control, Dubrovnik, Croatia, 05.10.2012.
14.C.M. Hackl, “Funnel control’ zur Positionsregelung von starren Drehgelenkrobotern mit grob bekannter Trägheitsmatrix”, Tagung des GMA-Fachausschusses 1.40 “Theoretische Verfahren der Regelungstechnik”, Salzburg, Austria, 19.09.2012.
13.C.M. Hackl, “‘Funnel control’ in der Robotik ?”, Institut für Robotik und Mechatronik, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Oberpfaffenhofen, 10.07.2012 (eingeladener Vortrag).
12.C.M. Hackl, “Position funnel control for rigid revolute joint robotic manipulators with known inertia matrix”, 20th Mediterranean Conference on Control and Automation, Barcelona, Spain, 05.07.2012.
11.C.M. Hackl, “Funnel control in mechatronics: An overview”, 50th IEEE Conference on Decision and Control and European Control Conference, Orlando, USA, 15.12.2011.
10.C.M. Hackl, “Grundlagen und Methoden der Regelungstechnik”, Fortbildungsseminar des IHK Bildungshau- ses Schwaben, Technical University of Munich, 04.10.2010– 06.10.2010.
9.C.M. Hackl, “Funnel Control für mechatronische Systeme mit Relativgrad 2”, Elgersburg Workshop 2010, Elgersburg, 01.03.2010.
8.C.M. Hackl, “Specially designed funnel-control in mechatronics,” 5th International Conference on Compu- tational Intelligence, Robotics and Autonomous Systems, Linz, Austria, 20.06.2008.
7.C.M. Hackl, “Applicability of funnel-control in robotics,” 5th International Conference on Computational Intelligence, Robotics and Autonomous Systems, Linz, Austria, 20.06.2008.
6.C.M. Hackl, “Nicht-Modellbasierte adaptive Regelung: Funnel Control – Einführung und mögliche Anwen- dungen”, Institut für Robotik und Mechatronik, Deutsches Zentrum für Luft- und Raumfahrt (DLR), Oberpfaffenhofen, 24.10.2007 (eingeladener Vortrag).
5.C.M. Hackl, “Optimale Bahnzugregelung am Beispiel einer Papierstreichanlage”, 9. Bahnlaufseminar, TU Chemnitz, 12.09.2007.
4.C.M. Hackl, “Nonidentifier-based adaptive control with saturated control input compensation,” 15th Me- diterranean Conference on Control and Automation, Athens, Greek, 28.06.2007.
3.C.M. Hackl, “Enhanced funnel-control with improved performance,” 15th Mediterranean Conference on Control and Automation, Athens, Greek, 28.06.2007.
2.C.M. Hackl, “Funnel-control with online foresight”, 26th IASTED International Conference Modelling, Iden- tification and Control, Innsbruck, Austria, 13.02.2007.
1.C.M. Hackl, “Funnel-control with integrating prefilter for nonlinear, time-varying two-mass flexible servo sys- tems”, 9th International Workshop on Advanced Motion Control, Istanbul, Turkey, 05.10.2006.